Products Categories
- High Speed Wire Twisting Machines
- Pair Twisting + Back-twisting Machines
- Single Twisting Machines (Laying-up Machines)
- Wire & Cable Extruders
- Auto Cutting Machine
- Pay-off Stands
- High Winding Machines
- Caterpillar-tractor
- Other Wire&Cable Related Machines
- FTTH Drop Cable Production Line
- Fiber Coloring and Rewinding Machine
- OFC Loose Tube Production Line
- OFC SZ Stranding Line
- Outdoor OFC Sheathing Line
- Indoor OFC Cable Tight buffer Production Line
- Indoor Premise Cable Production Line
Contact
Contact: Mr.She
Tel: 0769-82279779
0769-82279781
Fax:0769-82279781
Email:dg-hongrong@163.com
Web:www.dg-hongrong.com
Address:No.229 Mingzhu road Shatian Town Dongguan City. guangdong Province
Show
Nav: Home - ShowFan-shaped wire core into the mold is generally used principles of cable? Specific operation but also pay attention to?
hits:1772 date:2010/12/24 size:14px 12px
A: The first large die than a cable diameter 1.0 ~ 3.0mm, the second mold into a cable diameter than the small 0 ~ 0.6mm. The third smaller die diameter than a cable 0 ~ 0.2mm, the actual use of the mold also note that the cable in the mold can not swing, the hand switch to the cable core does not feel loose, insulated core die and the friction produces heat should not be hot. Insulated core to smooth out the die surface trace no injury marks.